Photovoltaic cleaning with SOLA-TECS F

Cleantecs GmbH has extended its SOLA-TECS system with an additional water-powered product. The SOLA-TECS F system was developed for cleaning PV modules on ground mounted systems. With this system, it is possible to clean from 800 mm to the entire height of a mounted system. Our SOLA-TECS F has no electrical system and is made entirely of mechanical components, making it rugged and uncomplicated. This means that it is possible to carry out repairs on site. Now you can clean without having to worry about the width of the path. Our SOLA-TECS F system is handoperated, so you can work at any width. The system can be adjusted on site in a range of 800 to 4,00 mm. This combination provides you with high fl exibility and effi ciency.

SOLA TECS F2000

SOLA-TECS F2000
Cleaning width 800 - 2000 mm
Area capacity ca. 312 m²/h
Operating pressure 100 - 120 bar
Weight ca. 43 kg
Max. temperature 40 °C
Water consumption 10 l/min
Diameter (brush) 160 mm
Min. distance to panel base 150 mm
Max. bridging 400 mm
Item number 0201125

SOLA TECS F3200

SOLA-TECS F3200
Cleaning width 800 - 3200 mm
Area capacity ca. 501 m²/h
Operating pressure 100 - 120 bar
Weight ca. 49 kg
Max. temperature 40 °C
Water consumption 15 l/min
Diameter (brush) 160 mm
Min. distance to panel base 150 mm
Max. bridging 400 mm
Item number 0201132

SOLA TECS F4000

SOLA-TECS F4000
Cleaning width 800 - 4000 mm
Area capacity ca. 625 m²/h
Operating pressure 100 - 120 bar
Weight ca. 59 kg
Max. temperature 40 °C
Water consumption 20 l/min
Diameter (brush) 160 mm
Min. distance to panel base 150 mm
Max. bridging 400 mm
Item number 0201133
Submit an enquiry

Would you like to get some advice?
Give up a call!

Tel. +49730792650

To submit an enquiry, please use our form.

Contact form

 

  • PV-Reinigung
  • PV-Reinigung
  • PV Reinigung SOLA TECS F 5
  • PV Reinigung SOLA TECS F 1
  • PV Reinigung SOLA TECS F 4
  • PV-Reinigung
  • PV-Reinigung
  • PV Reinigung SOLA TECS F 5
  • PV Reinigung SOLA TECS F 1
  • PV Reinigung SOLA TECS F 4

Introducing a new system


HIGH CLEANING RATE
Cleaning the entire height of the panels results in a high cleaning rate, which can not be achieved with a manual brush or with a cleaning robot.

CLEAN RIGHT UP TO THE EDGE
The brush bar can be turned through 180°, so cleaning up to the edge can be achieved without additional cleaning work.

11 05 2019 13 02 31

FLEXIBILITY
We designed the system as a modular construction kit. This means that you can adjust the length of the system on site from 800 to 4000 mm, as needed. Here, for example, is our F3200.

11 05 2019 11 00 40



The carriages of the SOLA-TECS F are designed so that gaps of 400 mm between the PV panels are bridged. This way, you can clean long stretches uninterrupted.

Abstand PV Module 2

 


EVEN, GENTLE CLEANING
To ensure uniform cleaning of the PV panels, the brush bar consists of individual drive units. Each drive unit has its own brush roller, which is fl exibly connected to the neighbouring brush roller. Thus, the brush bar can be pressed onto the entire working area with constant pressure, ensuring uniform cleaning.

Thanks to our hydraulic water-driven system, which simultaneously wets the cleaning surface and enables the self-cleaning of the bristles, gentle cleaning is guaranteed. The gentle cleaning is supported by a spray, which consists of two components: fi rstly, reused water, which is sprayed from the hydraulic drive system across the entire width; secondly, a fl at jet nozzle that reliably removes stubborn dirt from the edges of the panel’s frame.

11 05 2019 11 35 46

 

If necessary, the drive unit with the cleaning roller can also be used as a single cleaning device. In combi-nation with a lance, it is almost as versatile as our SOLA-TECS C.

11 05 2019 11 29 46

 

Video

Construction

 

Aufbau SOLA TECS F en

 

Downloads

Broschuere F
Brochure (pdf)

 

Accessories